Here's a formidable contender in the compound miter saw market with all the features you want in a high-end saw, plus one.We had high expectations for this saw, and we were not disappointed. Cutting is smooth, quiet, accurate and completely free of vibration, and the soft start is a nice feature. The 15-amp motor delivers 3,200 rpm, and electronic speed control maintains consistency under different loads.A common miter saw beef for us is a hard-to-read scale, but this one's large, clear and easy on the eyes, which we really appreciate. There are nine positive stops: 0 degrees, and left and right at 15, 22.5, 31.6 and 45 degrees, and bevels can be set from 0 to 45 degrees left and right. Capacities are great, too - in the upright and center position, the saw will cut workpieces up to 4-1/2 inches high and 12-1/8 inches wide. A 45-degree left bevel still lets you cut stock 2-5/8 inches high and 12 inches wide, accommodating even the widest trim and moldings. The only thing we'd change on this model is moving the rear bevel lever up front, but it's not a big detractor. It does take a little muscle to set a bevel angle, but again, it's not much of a mark against a saw that performs so beautifully.We like the vertical clamp on this saw; it's quick to adjust and holds like a champ. Even the dust collection system, usually a notch above ineffective on most miter saws, is impressive, keeping the cutting line surprisingly clean. The thing we found coolest about this saw is a small detail, but one you don't see often: a built-in fluorescent light. It illuminates the workpiece cut line exactly where you want it, and it's always right at your fingertips. Makita says the bulb will last some 2,000 hours, but we didn't stick around to check that out. Take care, though, as the bulb does get quite warm.There are a lot of compound miters on the market, but this one is definitely at the head of the class. Contractors and exacting woodworkers will love it.

Here's a formidable contender in the compound miter saw market with all the features you want in a high-end saw, plus one. We had high expectations for this saw, and we were not disappointed. Cutting is smooth, quiet, accurate and completely free of vibration, and the soft start is a nice feature. The 15-amp motor delivers 3,200 rpm, and electronic speed control maintains consistency under different loads. A common miter saw beef for us is a hard-to-read scale, but this one's large, clear and easy on the eyes, which we really appreciate. There are nine positive stops: 0 degrees, and left and right at 15, 22.5, 31.6 and 45 degrees, and bevels can be set from 0 to 45 degrees left and right. Capacities are great, too - in the upright and center position, the saw will cut workpieces up to 4-1/2 inches high and 12-1/8 inches wide. A 45-degree left bevel still lets you cut stock 2-5/8 inches high and 12 inches wide, accommodating even the widest trim and moldings. The only thing we'd change on this model is moving the rear bevel lever up front, but it's not a big detractor. It does take a little muscle to set a bevel angle, but again, it's not much of a mark against a saw that performs so beautifully. We like the vertical clamp on this saw; it's quick to adjust and holds like a champ. Even the dust collection system, usually a notch above ineffective on most miter saws, is impressive, keeping the cutting line surprisingly clean. The thing we found coolest about this saw is a small detail, but one you don't see often: a built-in fluorescent light. It illuminates the workpiece cut line exactly where you want it, and it's always right at your fingertips. Makita says the bulb will last some 2,000 hours, but we didn't stick around to check that out. Take care, though, as the bulb does get quite warm. There are a lot of compound miters on the market, but this one is definitely at the head of the class. Contractors and exacting woodworkers will love it.--Kris Jensen-Van Heste

Powerful, direct drive 15-amp motor never slips or bogs down. Built-in laser with micro fine adjustments clearly indicates line of cut. Independent switch allows laser to be seen independently of blade rotation. Built-in high output fluorescent light illuminates work area and lasts 2,000 hours on average. Dual steel rails supported by linear ball bearings. 9-positive stops at 15,22.5, 30, 45-degree left or right and 0-degree for the most common miter cuts, additional positive stops at 33.9 degrees left. Electronic speed control maintains constant speed under load, soft start feature for controlled operation. Single cast aluminum base has built-in wrench storage.Long slide track and wide pivot angle allow cross cuts up to 4 x 12 material. Large turn base and adjustable pivot fencee supports larger stock. STANDARD EQUIPMENT: No.A-94443 12" x 70T carbide-tipped blade, No.122540-9 vertical vise, No.122523-9 dust bag, 2 No.322932-4 extension wing, No.153898-5 sub-fence (right), No.762001-3 triangular rule, No.782212-4 socket wrench #13. SPECIFICATIONS: 12" blade, 15-amps, 1" arbor, 3,200 no load RPM. 28-1/2Length x 20-1/2Width x 28-1/4"Height. 52.9 lbs. tool weight.

Makita's 12-Inch Dual Slide Compound Miter Saw delivers smooth, solid, and adjustment-free accurate cuts for a range of applications including woodworking, cabinetry, deck building, framing, and more. The LS1214FL has dual steel rails supported by linear ball bearings to ensure stable, accurate cutting, with a built-in laser and powerful fluorescent light clearly indicate the line-of-cut for improved visibility and accuracy..c26-caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}.c26-matrix1a {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;background-color: #bcbec0;}.c26-matrix1b {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;background-color: #a7a9ac;}.c26-matrix1h {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 11px;font-weight: bold;color: #ffffff;background-color: #008b97;text-align: center;}img.c26-border {border:1px black solid;}a.nodecoration {text-decoration: none}View largerLS1214FL FeaturesPRECISION - Laser clearly indicates line of cut and is located in blade housing for precise cutsACCURACY - Dual rails supported by dual linear ball bearings for a smooth and accurate cutPOWER - Dynamically balanced direct drive motor eliminates burningDURABILITY - Precision-machined aluminum baseINCLUDES - T.C.T. blade, sub fence, extension wings, vertical vise, triangular rule, wrench and dustbagTool SpecificationsBlade Diameter12"Arbor1"No Load Speed3,200 RPMAMPS15.0Size(L x W x H)28-1/2" x 20-1/2" x 28-1/4"Net Weight52.9 lbs.15 AMP Motor and Large Cutting CapacityThe LS1214FL has a dynamically balanced 15 AMP direct drive motor to minimize burning, and is engineered to never slip or bog down like belt-drive units. The electronic speed control maintains constant speed under load, and the soft start technology delivers more controlled operation. The LS1214FL has 4-1/2-inch baseboard cutting capacity (vertical), and a 12-1/8-inch capacity at 90°/90°, with 2-5/8 x 8-1/2-inch at 45°/45°. In addition, the LS1214FL has dual rails supported by linear ball bearings to precisely guide the blade for a "dead-on" cut.Precise Miter and Bevel CutsThe LS1214FL has a dynamically balanced 15 AMP direct drive motor to minimize burning and is engineered to never slip or bog down like belt-drive units. The rear-handle bevel lock is easily accessible with positive stops at 33.9° and 45° (left) with 45° (right). The LS1214FL is engineered with a single-piece, precision-machined aluminum base that remains flat and true and never needs alignment. The fluorescent light works independently of the blade rotation to clearly illuminate the work surface. The built-in laser indicates the line of cut whether the blade is turning or not, and can be adjusted blade left or blade right using micro-fine adjustments to ensure precise cuts.Best in Class for a Range of ApplicationsThe LS1214FL is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, cabinet manufacturers, closet installers, decking and flooring applications, siding installers, stair installers, and general contractors seeking a best-in-class 12-inch dual-slide compound miter saw for the jobsite or on the benchtop.About Makita's Miter SawsMakita's LS1214FL miter saws are engineered to deliver smooth, solid, and adjustment-free accurate cuts. The dual rails are supported by linear ball bearings to ensure stable, accurate cutting, and the built-in laser and powerful fluorescent light that clearly indicates the line-of-cut for improved visibility and accuracy. In addition, the dynamically balanced 15 AMP direct drive motor minimizes burning, and never slips or bogs down like belt-drive units. The electronic speed control maintains constant speed under load, and the soft start technology is engineered for more controlled operation.About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throghout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is best-in-class engineering.WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.What's in the BoxMakita LS1214FL 12-Inch Dual Slide Compound Miter Saw, 12-inch x 70T.C.T. blade, vertical vise, dust bag, triangular rule, socket wrench, sub fence and two extension wings.

New Makita 12" Dual Slide Compound Miter Saw Includes Built In Laser